حقن صب الآلة Haitian HTF250X

board dimensions: 540 x 540 mm
<br>Calculated injection volume: 2831cm3
<br>Clamp: 250 ton
<br>clamping force: 650T
<br>closing force: 610 tons.
<br>Closing the movable displacement plate: 144 kN
<br>column diameter: 160 mm.
<br>column passage: 850 x 850 mm.
<br>Course volume: 2,956 cm3
<br>COURSE VOLUME: 1370 CM CM³
<br>Distance between connecting bars: 370 x 370 mm
<br>Distance between connecting bars (h x v): 1000mm x 930mm
<br>Electric motor power: 93 kW
<br>extraction force: 103 kN
<br>extractor course: 350
<br>GRIP STRENGTH: 3800
<br>heating zones: 4+beak.
<br>Height: 2.430 mm
<br>Hydraulic circuit pressure: 160 bar
<br>lamination capacity: 86g/1”
<br>Length: HAITIAN (ORIGINAL)
<br>Maximum injection capacity: 746 cm3/1”
<br>Maximum natural light: 1750 mm
<br>Minimum mold height: 600 mm
<br>mobile flat course: 930 mm.
<br>Mold opening course: 600 mm
<br>Mold opening force: 346 kN
<br>Mold thickness min/max.: 300/1000 mm.
<br>NUMBER OF CYLINDERS: 5
<br>numero tipo: 570 x 570
<br>Opening the moving plate: 169 kN
<br>Phase: 3 PHASE 380-415V 46.65KW
<br>PLASTIFICATION CAPACITY: 69.9 G/1"
<br>PLATE DIMENSIONS: 980X980 MM
<br>PLC/Controller Model: HAITIAN (ORIGINAL)
<br>Pressure on the material: 1548 bar
<br>REAR KNEJECTOR STRENGTH: 87 KN
<br>SCREW DIAMETER: 75 MMS
<br>screw diameter: 95 mm
<br>Screw Diameter (MM): 50
<br>Screw diameter (MM): 50
<br>SCREW LENGTH: 21 L/D
<br>Screw length (LD): 21
<br>screw speed: 153 rpm
<br>Shot weight: 442 gr
<br>Size of mold plates (h x v): 1550mm x 1440mm
<br>Tie bar H X V (MM): 570 x 570
<br>Total heating power: 38 kW.
<br>Total installed power: 130 kW
<br>vacuum cycles: 10-11 n/1"
<br>Weight: 47.500 kg
<br>Width: 2650 mm
<br>250 ton HAITIAN HTF250X injection machine with WITTMAN robot